7200L15SOGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Standby Current-Max | 0.005A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 17.9mm |
| Width | 8.4mm |
| Thickness | 2.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7200L15SOGI Overview
FIFO memory chip is contained in the SOIC package.Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 28 terminations.The operation pins are 28 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.This FIFO memory IC is equipped with 28 pins in total.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.There is 40MHz frequency set for the clock of the FIFO memory IC.
7200L15SOGI Features
FIFOs category
Clock frequency of 40MHz
7200L15SOGI Applications
There are a lot of Integrated Device Technology (IDT) 7200L15SOGI FIFOs Memory applications.
- Test Equipment
- Smart Meter
- Game Controller
- IP Camera Buffer
- Application that requires re-writable nonvolatile parameter memory
- Extended product-change notification
- Measurement Equipment
- Address mapping
- Notebook
- A/D output buffers
