7200L15TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L15TP Overview
You can find FIFO memory chip in the PDIP package.In this case, it is packaged in case number Bulk .It is recommended that memory IC be mounted in the Through Hole direction.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 28 terminations.28 pins are the operation pins.In order for FIFO design to operate, a maximum current of 80mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is self-contained in FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 28 pins on this FIFO memory IC.Normally, 5V power supplies are owned by the component.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The clock of the FIFO memory IC runs at 40MHz frequency.
7200L15TP Features
FIFOs category
Clock frequency of 40MHz
7200L15TP Applications
There are a lot of Integrated Device Technology (IDT) 7200L15TP FIFOs Memory applications.
- TVs
- Video time base correction
- Event Recorder
- Communications Systems
- Computers
- Portable Information Devices
- Rate buffers
- Video Processing
- Computer networks
- SPD for DDR3 Memory Modules
