7200L20TDB
| Parameters | |
|---|---|
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 5.08mm |
7200L20TDB Overview
The CDIP package contains FIFO memory chip.Memory IC's recommended mounted way is Through Hole .A supply voltage of 5V allows for high efficiency.28 terminations are contained in FIFO means.There are 28 pins on the operation pins.FIFO design requires 100mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.As a result of having a maximum operating temperature of 125°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Currently, it has 28 pins.It is normal for a component to be equipped with 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock running at frequency 33.3MHz is used by the FIFO memory IC.
7200L20TDB Features
FIFOs category
Clock frequency of 33.3MHz
7200L20TDB Applications
There are a lot of Integrated Device Technology (IDT) 7200L20TDB FIFOs Memory applications.
- MP3 Interface for Automobile
- Medical Monitoring Device
- Rate buffers
- Address mapping
- Programmable Logic Controller
- General Data Collection Applications at Low-Temperatures
- SPD for DDR3 Memory Modules
- Multimedia
- Desktop Computers
- Wireless
