7200L20TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7200L20TP Overview
The PDIP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Through Hole direction.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 28 terminations.The operation pins are 28 pins.Its maximum operating current is 80mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 28 pins on this board.A component normally has 5V power supplies attached to it.With the help of this FIFO memory, RETRANSMIT can also be generated.FIFO memory ICs run at a frequency of 33.3MHz .
7200L20TP Features
FIFOs category
Clock frequency of 33.3MHz
7200L20TP Applications
There are a lot of Integrated Device Technology (IDT) 7200L20TP FIFOs Memory applications.
- Video Processing
- Switches
- Extended product-change notification
- Test Equipment
- Thermal Management for DDR3 Memory Modules
- Rate buffers
- Digital buffering
- Laser Receiver System
- Consumer Systems
- Notebook
