7200L25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 256B |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L25J Overview
FIFO memory chip can be found in the PLCC package.There is a memory of 256B available for storing data and applications.Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V , high efficiency is possible.32 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this FIFO memory IC.The memory logic's maximum value is 28.5MHz for regular operation.The component normally owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.By using 1 circuits, FIFO memory chip achieves enhanced flexibility.
7200L25J Features
256B memory size
FIFOs category
Frequency at most
7200L25J Applications
There are a lot of Integrated Device Technology (IDT) 7200L25J FIFOs Memory applications.
- Extended product-change notification
- HDD
- SPI Bus Flash Memory Device
- GPS Offender Tracking
- Thermal Management for DDR3 Memory Modules
- Data
- IP Radio
- Portable Information Devices
- Switches
- SPD for DDR3 Memory Modules
