7200L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L25JI8 Overview
PLCC is the package in which FIFO memory chip is contained.Surface Mount is memory IC's recommended mounting method.An input voltage of 5V results in high efficiency.FIFO means contains 32 terminations.32 pins are used for operation.Its maximum operating current is 80mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.Its maximum operating temperature of 85°C °C ensures stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 32 pins.It is normal for the component to own 5V power supplies.Using this gadget, RETRANSMIT can also be generated.FIFO memory ICs run at a frequency of 28.5MHz .
7200L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
7200L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L25JI8 FIFOs Memory applications.
- Data
- Look-up Tables
- Code converters
- Microprogramming
- Down-Hole Energy Drilling
- IP Camera Buffer
- Computers
- Disk Controllers
- General Data Collection Applications at Extreme High-Temperatures
- Switches
