7200L35J
| Parameters | |
|---|---|
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 256B |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 22.2MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
7200L35J Overview
This package is included in PLCC .There is a 256B MB memory on the FIFO chips, which can be used to store both applications and data.Memory IC's recommended mounted way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains 32 terminations.There are 32 pins for operation.The maximum current required for its operation is 80mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.A FIFO memory's maximum value of 22.2MHz can be used for regular operation.Components normally possess 5V power supplies.The gadget can also generate a value of RETRANSMIT .FIFO memory chip offers enhanced flexibility due to its use of 2 circuits.
7200L35J Features
256B memory size
FIFOs category
Frequency at most
7200L35J Applications
There are a lot of Integrated Device Technology (IDT) 7200L35J FIFOs Memory applications.
- Emulators
- Code converters
- HDD
- Communications Systems
- Look-up Tables
- Microprogramming
- Magnetic memories
- One assembly
- Queues for communication systems
- Address mapping
