7200L50J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L50J Overview
The PLCC package contains FIFO memory chip.A Surface Mount mounting method is recommended.An input voltage of 5V results in high efficiency.A total of 32 terminations can be found in FIFO means.32 pins are used for operation.For its operation, 80mA is the maximum current required.A voltage of 5V should be used for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.As a result, it contains a total of 32 pins.A FIFO memory's maximum value of 15MHz can be used for regular operation.A component normally has 5V power supplies attached to it.This gadget can also generate RETRANSMIT .Due to the use of 2 circuits, FIFO memory chip has an enhanced level of flexibility.
7200L50J Features
FIFOs category
Frequency at most
7200L50J Applications
There are a lot of Integrated Device Technology (IDT) 7200L50J FIFOs Memory applications.
- Switches
- Digital buffering
- Computer networks
- Temporary storage elements
- Industrial Systems
- Laser Receiver System
- Application that requires re-writable nonvolatile parameter memory
- General Data Collection Applications at Low-Temperatures
- Cameras
- Smart Meter
