7200L50TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L50TP Overview
This package is included in PDIP .A Through Hole mounting method is recommended.An input voltage of 5V results in high efficiency.FIFO means contains a total of 28 terminations.As far as the operation pins are concerned, they are 28 pins.Its maximum operating current is 80mA .In order to maximize efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 28 pins are attached to it.Normaly, the component is powered by 5V power supplies.This gadget can also generate RETRANSMIT .The clock of the FIFO memory IC runs at 15MHz frequency.
7200L50TP Features
FIFOs category
Clock frequency of 15MHz
7200L50TP Applications
There are a lot of Integrated Device Technology (IDT) 7200L50TP FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Network bridges
- Look-up Tables
- Notebook
- Video Processing
- Product traceability
- Multi-stage synchronizer
- A/D output buffers
- Data communications
- SPI Bus Flash Memory Devices
