7201LA12J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA12J8 Overview
FIFO memory chip is included in the PLCC package.Mounting it in Surface Mount is recommended.With a supply voltage of 5V volts, high efficiency is possible.In FIFO means, there are 32 terminations.These are the 32 pins for operation.FIFO design requires 80mA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 32 pins are attached to it.It is normal for a component to be equipped with 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The clock of the FIFO memory IC runs at 50MHz frequency.
7201LA12J8 Features
FIFOs category
Clock frequency of 50MHz
7201LA12J8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA12J8 FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Event Recorder
- MP3 Interface for Automobile
- Multimedia
- High-speed disk
- Down-Hole Energy Drilling
- Extended product-change notification
- Temporary storage elements
- Character generators
- Consumer
