7201LA12JG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7201LA12JG Overview
The PLCC package contains FIFO memory chip.It is pointing in the direction of Surface Mount .An input voltage of 5V results in high efficiency.A total of 32 terminations are contained within FIFO means.There are 32 pins for operation.In order to operate FIFO design, a maximum current of 80mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.A total of 32 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The clock of the FIFO memory IC runs at 50MHz frequency.
7201LA12JG Features
FIFOs category
Clock frequency of 50MHz
7201LA12JG Applications
There are a lot of Integrated Device Technology (IDT) 7201LA12JG FIFOs Memory applications.
- Digital buffering
- Test site
- General Data Collection Applications at Low-Temperatures
- Measurement Equipment
- Consumer Systems
- Communications
- SPI Bus Flash Memory Devices
- HDD
- Wireless
- Laser Receiver System
