7201LA12PDG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7201LA12PDG Overview
You can find FIFO memory chip in package PDIP .In this case, it is packaged in case number Bulk .Memory IC's recommended mounted way is Through Hole .When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 28 .In the case of the operation pins, they are 28 pins.In order to operate it, it requires 80mA volts of current.A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC has a total of 28 pins.Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC runs at a frequency of 50MHz .
7201LA12PDG Features
FIFOs category
Clock frequency of 50MHz
7201LA12PDG Applications
There are a lot of Integrated Device Technology (IDT) 7201LA12PDG FIFOs Memory applications.
- Video time base correction
- Multi-stage synchronizer
- One assembly
- Network switching/routing
- Wireless
- Routers
- Digital buffering
- GPS Offender Tracking
- SPI Bus Flash Memory Devices
- Consumer Systems
