7201LA12SOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.048mm |
| Length | 17.9mm |
| Width | 8.4mm |
| Thickness | 2.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7201LA12SOG8 Overview
FIFO memory chip is included in the SOIC package.There's a Tape & Reel on the package.It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 28 terminations, which indicates that FIFO means is empty.These are the 28 pins for operation.In order for FIFO design to operate, a maximum current of 80mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.As a result, it contains a total of 28 pins.Normally, 5V power supplies are owned by the component.Additionally, RETRANSMIT can be generated with this FIFO memory.There is 50MHz frequency set for the clock of the FIFO memory IC.
7201LA12SOG8 Features
FIFOs category
Clock frequency of 50MHz
7201LA12SOG8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA12SOG8 FIFOs Memory applications.
- GPS Offender Tracking
- SPD for DDR3 Memory Modules
- Multi-stage synchronizer
- Character generators
- Event Recorder
- Computers
- Desktop Computers
- Battery Charger
- Network switching/routing
- Portable Information Devices
