7201LA15JGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7201LA15JGI8 Overview
FIFO memory chip can be found in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .A total of 32 terminations can be found in FIFO means.There are 32 pins for operation.In order to operate FIFO design, a maximum current of 80mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It operates at -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.There is 40MHz frequency set for the clock of the FIFO memory IC.
7201LA15JGI8 Features
FIFOs category
Clock frequency of 40MHz
7201LA15JGI8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA15JGI8 FIFOs Memory applications.
- Network bridges
- Firmware loaders
- Portable Information Devices
- Controlled baseline
- Code converters
- SPI Bus Flash Memory Devices
- Smart Meter
- Down-Hole Energy Drilling
- Temporary storage elements
- Portable Information Devices
