7201LA15PI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA15PI Overview
You can find FIFO memory chip in the PDIP package.It is pointing in the direction of Through Hole .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains a total of 28 terminations.FIFO design has 28 operation pins.In order to operate FIFO design, a maximum current of 80mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.As a result, it contains a total of 28 pins.A component normally has 5V power supplies attached to it.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC runs at a frequency of 40MHz .
7201LA15PI Features
FIFOs category
Clock frequency of 40MHz
7201LA15PI Applications
There are a lot of Integrated Device Technology (IDT) 7201LA15PI FIFOs Memory applications.
- Queues for communication systems
- IP Camera Buffer
- Routers
- Extended product life cycle
- Extended product-change notification
- Firmware loaders
- Laser Receiver System
- One assembly
- Portable Information Devices
- Computers
