7201LA15SOGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Weight | 2.214806g |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 512B |
| Max Supply Current | 80mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Standby Current-Max | 0.005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Height | 2.62mm |
| Length | 17.9mm |
| Width | 8.4mm |
| Thickness | 2.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7201LA15SOGI Overview
The SOIC package contains FIFO memory chip.Apps and data can be stored in the 512B memory of the FIFO chip.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 5V allows for high efficiency.I found that it has 28 terminations in FIFO means.The operation pins are 28 pins.In order to operate FIFO design, a maximum current of 80mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.A maximum voltage of 5.5V volts can be applied to FIFO memory.As a result, it contains a total of 28 pins.Normally, the FIFO memory's maximum value is 40MHz .Components normally possess 5V power supplies.The gadget can also generate a value of RETRANSMIT .By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
7201LA15SOGI Features
512B memory size
FIFOs category
Frequency at most
7201LA15SOGI Applications
There are a lot of Integrated Device Technology (IDT) 7201LA15SOGI FIFOs Memory applications.
- Communications
- IP Camera Buffer
- Rate buffers
- Cardiac Monitoring Device
- Application that requires re-writable nonvolatile parameter memory
- Industrial Systems
- Alarm System
- Video time base correction
- SPD for DDR3 Memory Modules
- IP Radio
