7201LA15TPGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Memory Width | 9 |
| Standby Current-Max | 0.005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.671mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
7201LA15TPGI Overview
FIFO memory chip is included in the DIP package.A Through Hole mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 28 .There are 28 pins for operation.There is a maximum current requirement of 80mA for its operation.A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It has a total of 28 pins on it.There are normally 5V power supplies attached to the component.Using this gadget, RETRANSMIT can also be generated.There is 40MHz frequency set for the clock of the FIFO memory IC.
7201LA15TPGI Features
FIFOs category
Clock frequency of 40MHz
7201LA15TPGI Applications
There are a lot of Integrated Device Technology (IDT) 7201LA15TPGI FIFOs Memory applications.
- Industrial Systems
- SPI Bus Flash Memory Device
- Extended product life cycle
- Programmable Logic Controller
- Video Processing
- Optical memories
- Cameras
- Networking
- Communications
- GPS Offender Tracking
