7201LA15TPI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA15TPI Overview
You can find FIFO memory chip in package PDIP .Through Hole is recommended as the mounting method.An input voltage of 5V results in high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.28 pins are the operation pins.Its maximum operating current is 80mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.It consists of a total of 28 pins.Components normally possess 5V power supplies.The gadget can also generate a value of RETRANSMIT .A clock on the FIFO memory IC runs at a frequency of 40MHz .
7201LA15TPI Features
FIFOs category
Clock frequency of 40MHz
7201LA15TPI Applications
There are a lot of Integrated Device Technology (IDT) 7201LA15TPI FIFOs Memory applications.
- Digital buffering
- Extended product life cycle
- IP Radio
- Network switching/routing
- Video Processing
- Video time base correction
- HDD
- Game Controller
- TVs
- Event Recorder
