7201LA20DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33.33MHz |
| Access Time | 20 ns |
| Data Bus Width | 9b |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA20DB Overview
The CDIP package contains FIFO memory chip.The package comes in a case of Bulk .Mounting it in the Through Hole way is recommended.A supply voltage of 5V is capable of producing high efficiency.I found that it has 28 terminations in FIFO means.These are the 28 pins for operation.FIFO requires a minimum of 100mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at -55°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 125°C degrees Celsius assures stable operation.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC has a total of 28 pins.Normally, the component owns 5V power supplies.The gadget can also generate a value of RETRANSMIT .There is 33.33MHz frequency set for the clock of the FIFO memory IC.
7201LA20DB Features
FIFOs category
Clock frequency of 33.33MHz
7201LA20DB Applications
There are a lot of Integrated Device Technology (IDT) 7201LA20DB FIFOs Memory applications.
- Wireless
- Switches
- A/D output buffers
- SPD for DDR3 Memory Modules
- Game Controller
- Network bridges
- Optical memories
- Telecommunication
- Consumer Systems
- Consumer
