7201LA20J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.33MHz |
| Access Time | 20 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA20J Overview
FIFO memory chip is contained in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.The number of terminations in FIFO means is 32 .Operation pins are 32 .In order to operate FIFO design, a maximum current of 80mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 32 pins on this board.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory can be used to generate RETRANSMIT .A clock running at frequency 33.33MHz is used by the FIFO memory IC.
7201LA20J Features
FIFOs category
Clock frequency of 33.33MHz
7201LA20J Applications
There are a lot of Integrated Device Technology (IDT) 7201LA20J FIFOs Memory applications.
- Computer networks
- Application that requires re-writable nonvolatile parameter memory
- Alarm System
- Product traceability
- Communications Systems
- Game Consoles
- Transistors
- IP Camera Buffer
- Test Equipment
- Thermal Management for DDR3 Memory Modules
