7201LA20J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.33MHz |
| Access Time | 20 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA20J8 Overview
You can find FIFO memory chip in package PLCC .A Surface Mount mounting method is recommended.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.FIFO requires a minimum of 80mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.Approximately 32 pins are attached to it.Components normally possess 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The clock of the FIFO memory IC runs at 33.33MHz frequency.
7201LA20J8 Features
FIFOs category
Clock frequency of 33.33MHz
7201LA20J8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA20J8 FIFOs Memory applications.
- Medical Monitoring Device
- Thermal Management for DDR3 Memory Modules
- Extended product-change notification
- Signal processing
- Video
- Test Equipment
- Extended product life cycle
- Fabrication Site
- Data
- PC peripheral
