7201LA20LB
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33.33MHz |
| Access Time | 20 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
7201LA20LB Overview
FIFO memory chip is included in the CLCC package.Mounting it in the Surface Mount way is recommended.A supply voltage of 5V allows for high efficiency.32 terminations are contained in FIFO means.FIFO design has 32 operation pins.FIFO requires a minimum of 100mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.By operating at a temperature of 125°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 32 pins on this board.A component normally has 5V power supplies attached to it.This gadget can also be used to generate RETRANSMIT .The clock of the FIFO memory IC runs at 33.33MHz frequency.
7201LA20LB Features
FIFOs category
Clock frequency of 33.33MHz
7201LA20LB Applications
There are a lot of Integrated Device Technology (IDT) 7201LA20LB FIFOs Memory applications.
- Data
- Seismic Data Collection at Extreme Temperatures
- Battery Charger
- Application that requires re-writable nonvolatile parameter memory
- Cardiac Monitoring Device
- Communications
- Buses
- Disk Controllers
- Desktop Computers
- Communications Systems
