7201LA20LB8
| Parameters | |
|---|---|
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33.33MHz |
| Access Time | 20 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | CLCC |
7201LA20LB8 Overview
FIFO memory chip is included in the CLCC package.You'll find it packaged in the shape of a Tape & Reel .A Surface Mount mounting method is recommended.Supply voltages of 5V are capable of achieving high efficiency.In FIFO means, there are 32 terminations.32 pins are the operation pins.FIFO design requires 100mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .It operates at -55°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 125°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this FIFO memory IC.Components normally possess 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.There is 33.33MHz frequency set for the clock of the FIFO memory IC.
7201LA20LB8 Features
FIFOs category
Clock frequency of 33.33MHz
7201LA20LB8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA20LB8 FIFOs Memory applications.
- Programmable Logic Controller
- Video Processing
- Controlled baseline
- Alarm System
- Battery Charger
- Data-acquisition systems
- Consumer Systems
- Smart Meter
- SPD for DDR3 Memory Modules
- HDD
