7201LA20P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.33MHz |
| Access Time | 20 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA20P Overview
FIFO memory chip can be found in the PDIP package.A Through Hole mounting method is recommended.An input voltage of 5V results in high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.Operation pins are 28 .In order to operate FIFO design, a maximum current of 80mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.Currently, it has 28 pins.It is normal for a component to be equipped with 5V power supplies.This gadget can also generate RETRANSMIT .The FIFO memory IC runs at a frequency of 33.33MHz .
7201LA20P Features
FIFOs category
Clock frequency of 33.33MHz
7201LA20P Applications
There are a lot of Integrated Device Technology (IDT) 7201LA20P FIFOs Memory applications.
- PC peripheral
- Application that requires re-writable nonvolatile parameter memory
- Signal processing
- A/D output buffers
- Consumer
- General Data Collection Applications at Low-Temperatures
- High-speed graphics pixel buffer
- Disk Controllers
- Extended product life cycle
- SPI Bus Flash Memory Devices
