7201LA25J
| Parameters | |
|---|---|
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 512B |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
7201LA25J Overview
PLCC is the package in which FIFO memory chip is contained.There is a memory of 512B on the FIFO chip that can be used to store applications and data.The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.32 terminations are contained in FIFO means.32 pin is used for operation.For its operation, 80mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a self-contained gadget within FIFOs .It has a type OTHER FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 32 pins.During regular operation, the FIFO memory's maximum value is 28.5MHz .Normally, 5V power supplies are owned by the component.It is also possible to generate RETRANSMIT with the use of this FIFO memory.By using 1 circuitry, FIFO memory chip has enhanced flexibility.
7201LA25J Features
512B memory size
FIFOs category
Frequency at most
7201LA25J Applications
There are a lot of Integrated Device Technology (IDT) 7201LA25J FIFOs Memory applications.
- Desktop Computers
- Battery Charger
- Digital buffering
- Data-acquisition systems
- Game Controller
- Magnetic memories
- Microprogramming
- Portable Information Devices
- Thermal Management for DDR3 Memory Modules
- Alarm System
