7201LA25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA25JI8 Overview
You can find FIFO memory chip in package PLCC .Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.32 terminations are contained in FIFO means.32 pins are used for operation.The maximum current required for its operation is 80mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 32 pins are attached to it.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 28.5MHz .
7201LA25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
7201LA25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA25JI8 FIFOs Memory applications.
- Routers
- Signal processing
- Code converters
- High-speed disk
- Telecommunication
- HDD
- Event Recorder
- SPI Bus Flash Memory Devices
- A/D output buffers
- Battery Charger
