7201LA25P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Access Time | 25 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7201LA25P Overview
You can find FIFO memory chip in the PDIP package.Through Hole is recommended as the mounting method.A supply voltage of 5V allows for high efficiency.28 terminations are contained in FIFO means.FIFO design has 28 operation pins.FIFO design requires 80mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V V.As a result, it contains a total of 28 pins.Normally, 5V power supplies are owned by the component.This gadget can also generate RETRANSMIT .
7201LA25P Features
FIFOs category
7201LA25P Applications
There are a lot of Integrated Device Technology (IDT) 7201LA25P FIFOs Memory applications.
- TVs
- Temporary storage elements
- Optical memories
- Extended product life cycle
- MP3 Interface for Automobile
- Rate buffers
- Industrial Systems
- Thermal Management for DDR3 Memory Modules
- Medical Monitoring Device
- Address mapping
