7201LA30LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2005 |
| Part Status | Active |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Access Time | 30 ns |
| Direction | Unidirectional |
| Density | 4.5 kb |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Programmable Flags Support | No |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA30LB Overview
You will find FIFO memory chip in the LCC package.It is recommended that memory IC be mounted in the Surface Mount direction.32 pins are used for operation.In order to operate FIFO design, a maximum current of 100mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of -55°C degrees Celsius to ensure reliabilFIFOy.By operating at a temperature of 125°C °C, the FIFO products is capable of stable operation.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.
7201LA30LB Features
7201LA30LB Applications
There are a lot of Integrated Device Technology (IDT) 7201LA30LB FIFOs Memory applications.
- TVs
- Disk Controllers
- Laser Receiver System
- Digital buffering
- Buses
- Computers
- IP Camera Buffer
- General Data Collection Applications at Extreme High-Temperatures
- Telecommunication
- Consumer
