7201LA30LB8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA30LB8 Overview
FIFO memory chip is contained in the LCC package.There is a case Tape & Reel in which it is packaged.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 32 .FIFO design has 32 operation pins.In order to operate FIFO design, a maximum current of 100mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.FIFO operates at a minimum temperature of -55°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.The gadget in FIFOs is self-contained.A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.A total of 32 pins are present on the FIFO memory IC.There are normally 5V power supplies attached to the component.Using this gadget, RETRANSMIT can also be generated.A clock running at frequency 25MHz is used by the FIFO memory IC.
7201LA30LB8 Features
FIFOs category
Clock frequency of 25MHz
7201LA30LB8 Applications
There are a lot of Integrated Device Technology (IDT) 7201LA30LB8 FIFOs Memory applications.
- Data-acquisition systems
- Telecommunication
- Optical memories
- Notebook
- Tape controllers
- Seismic Data Collection at Extreme Temperatures
- Video time base correction
- Extended product-change notification
- Buses
- IP Radio
