7201LA30TDB
| Parameters | |
|---|---|
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
7201LA30TDB Overview
This package is included in CDIP .The package comes in a case of Bulk .It is pointing in the direction of Through Hole .An input voltage of 5V results in high efficiency.FIFO means contains a total of 28 terminations.Operation pins are 28 .Its maximum operating current is 100mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of -55°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.A total of 28 pins are present on the FIFO memory IC.It is normal for a component to be equipped with 5V power supplies.Using this gadget, RETRANSMIT can also be generated.FIFO memory ICs run at a frequency of 25MHz .
7201LA30TDB Features
FIFOs category
Clock frequency of 25MHz
7201LA30TDB Applications
There are a lot of Integrated Device Technology (IDT) 7201LA30TDB FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Programmable Logic Controller
- Multi-stage synchronizer
- Test site
- Desktop Computers
- IP Radio
- Optical memories
- Address mapping
- Character generators
- Thermal Management for DDR3 Memory Modules
