Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
28 |
Packaging |
Bulk |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
RETRANSMIT |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
28 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
80mA |
Max Supply Current |
80mA |
Clock Frequency |
22.2MHz |
Access Time |
35 ns |
Data Bus Width |
9b |
Organization |
512X9 |
Density |
4.5 kb |
Standby Current-Max |
0.0005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
45 ns |
Height Seated (Max) |
4.699mm |
Length |
36.6mm |
Width |
15.24mm |
Thickness |
3.8mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
7201LA35P Overview
PDIP is a package that contains FIFO memory chip.It's packaged in the shape of a Bulk .Mounting it in Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations are contained within FIFO means.28 pins are used for operation.FIFO requires a minimum of 80mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Approximately 28 pins are attached to it.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.This FIFO memory IC operates at a frequency of 22.2MHz .
7201LA35P Features
FIFOs category
Clock frequency of 22.2MHz
7201LA35P Applications
There are a lot of Integrated Device Technology (IDT) 7201LA35P FIFOs Memory applications.
- Computer networks
- Video Processing
- MP3 Interface for Automobile
- Event Recorder
- HDD
- Down-Hole Energy Drilling
- Rate buffers
- Cardiac Monitoring Device
- Smart Meter
- Cameras