7201LA50DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Direction | Unidirectional |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7201LA50DB Overview
FIFO memory chip is included in the CDIP package.Mounting it in Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 28 terminations.28 pins are used for operation.In order to maximize efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of -55°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 125°C °C is necessary for stable operation.It is self-contained in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.The FIFO memory IC is equipped with a total of 28 pins.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory can be used to generate RETRANSMIT .FIFO memory ICs run at a frequency of 15MHz .
7201LA50DB Features
FIFOs category
Clock frequency of 15MHz
7201LA50DB Applications
There are a lot of Integrated Device Technology (IDT) 7201LA50DB FIFOs Memory applications.
- High-speed graphics pixel buffer
- IP Camera Buffer
- Smart Meter
- Tape controllers
- Temporary storage elements
- Microprogramming
- Video time base correction
- Portable Information Devices
- SPI Bus Flash Memory Devices
- Computer Systems
