7201LA50J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 512B |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7201LA50J Overview
FIFO memory chip is contained in the PLCC package.Apps and data can be stored in the 512B memory of the FIFO chip.It is pointing in the direction of Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 80mA .A voltage of 5V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.As a result, it contains a total of 32 pins.For regular operation, the memory logic's maximum value is 15MHz .A component normally has 5V power supplies attached to it.This gadget can also be used to generate RETRANSMIT .Through the use of 1 circuits, FIFO memory chip is able to achieve enhanced flexibility.
7201LA50J Features
512B memory size
FIFOs category
Frequency at most
7201LA50J Applications
There are a lot of Integrated Device Technology (IDT) 7201LA50J FIFOs Memory applications.
- Rate buffers
- Code converters
- Alarm System
- Notebook
- Network switching/routing
- Data-acquisition systems
- Video time base correction
- Tape controllers
- Computers
- GPS Offender Tracking
