7201LA50P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 512B |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Density | 4.5 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7201LA50P Overview
FIFO memory chip is included in the PDIP package.The FIFO chips have a memory of 512B that can be used to store applications and data.Memory IC's recommended mounted way is Through Hole .With a supply voltage of 5V volts, high efficiency is possible.A total of 28 terminations are contained within FIFO means.These are the 28 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 28 pins in total.It is recommended that the FIFO memory's maximum value be set to 15MHz .Normally, the component owns 5V power supplies.This gadget can also generate RETRANSMIT .Using 1 circuits allows for enhanced flexibility.
7201LA50P Features
512B memory size
FIFOs category
Frequency at most
7201LA50P Applications
There are a lot of Integrated Device Technology (IDT) 7201LA50P FIFOs Memory applications.
- Disk Controllers
- Magnetic memories
- Measurement Equipment
- Wireless
- Portable Information Devices
- Battery Charger
- IP Radio
- Transistors
- Analog-to-digital converters
- Game Consoles
