7202LA12JG
| Parameters | |
|---|---|
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
7202LA12JG Overview
PLCC is a package that contains FIFO memory chip.In addition to storing applications and data, the FIFO chips have a memory of 1.1kB .It is recommended that memory IC be mounted in the Surface Mount direction.Supply voltages of 5V are capable of achieving high efficiency.32 terminations are contained in FIFO means.There are 32 pins on the operation pins.In order to operate FIFO design, a maximum current of 80mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Currently, it has 32 pins.During regular operation, 50MHz is the FIFO memory's maximum value.The component normally owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The 1 circuit is used in order to enhance its flexibility.
7202LA12JG Features
1.1kB memory size
FIFOs category
Frequency at most
7202LA12JG Applications
There are a lot of Integrated Device Technology (IDT) 7202LA12JG FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Microprogramming
- Rate buffers
- HDD
- Temporary storage elements
- Fabrication Site
- TVs
- Tape controllers
- MP3 Interface for Automobile
- Game Consoles
