7202LA12SOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.048mm |
| Length | 17.9mm |
| Width | 8.4mm |
| Thickness | 2.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7202LA12SOG8 Overview
You will find FIFO memory chip in the SOIC package.A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 5V .FIFO means contains 28 terminations.28 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .In order to maximize efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC is equipped with a total of 28 pins.Normally, 5V power supplies are owned by the component.This gadget can also generate RETRANSMIT .A clock on the FIFO memory IC runs at a frequency of 50MHz .
7202LA12SOG8 Features
FIFOs category
Clock frequency of 50MHz
7202LA12SOG8 Applications
There are a lot of Integrated Device Technology (IDT) 7202LA12SOG8 FIFOs Memory applications.
- HDD
- Routers
- SPD for DDR3 Memory Modules
- Game Consoles
- High-speed graphics pixel buffer
- Signal processing
- GPS Offender Tracking
- Video Processing
- Disk Controllers
- Code converters
