7202LA12TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA12TP Overview
You can find FIFO memory chip in package PDIP .This FIFO memory chip is packaged as a Bulk .Through Hole is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 28 terminations.28 pins are used for operation.For its operation, 80mA is the maximum current required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Currently, it has 28 pins.Components normally possess 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.In this FIFO memory IC, the clock runs at frequency 50MHz .
7202LA12TP Features
FIFOs category
Clock frequency of 50MHz
7202LA12TP Applications
There are a lot of Integrated Device Technology (IDT) 7202LA12TP FIFOs Memory applications.
- MP3 Interface for Automobile
- Battery Charger
- Firmware loaders
- Emulators
- General Data Collection Applications at Extreme High-Temperatures
- One assembly
- Routers
- A/D output buffers
- Magnetic memories
- Seismic Data Collection at Extreme Temperatures
