7202LA12TPG
| Parameters | |
|---|---|
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
7202LA12TPG Overview
You can find FIFO memory chip in the PDIP package.Mounting it in Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations are contained within FIFO means.FIFO design has 28 operation pins.For its operation, 80mA is the maximum current required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 28 pins are present on the FIFO memory IC.A component normally has 5V power supplies attached to it.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 50MHz .
7202LA12TPG Features
FIFOs category
Clock frequency of 50MHz
7202LA12TPG Applications
There are a lot of Integrated Device Technology (IDT) 7202LA12TPG FIFOs Memory applications.
- PC peripheral
- Network switching/routing
- Communications
- Measurement Equipment
- IP Radio
- Seismic Data Collection at Extreme Temperatures
- One assembly
- IP Camera Buffer
- Networking
- TVs
