7202LA15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7202LA15J Overview
This package is included in PLCC .Surface Mount is recommended as the mounting method.When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 32 terminations.32 pins are the operation pins.FIFO requires a minimum of 80mA current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.Normally, the FIFO memory's maximum value is 40MHz .There are normally 5V power supplies attached to the component.This gadget can also generate RETRANSMIT .Using 2 circuits allows for enhanced flexibility.
7202LA15J Features
FIFOs category
Frequency at most
7202LA15J Applications
There are a lot of Integrated Device Technology (IDT) 7202LA15J FIFOs Memory applications.
- Test Equipment
- Medical Monitoring Device
- Consumer
- SPI Bus Flash Memory Device
- Emulators
- General Data Collection Applications at Extreme High-Temperatures
- Magnetic memories
- Microprogramming
- Look-up Tables
- Multi-stage synchronizer
