7202LA15J8
| Parameters | |
|---|---|
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
7202LA15J8 Overview
FIFO memory chip is included in the PLCC package.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 32 terminations can be found in FIFO means.The operation pins are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It consists of a total of 32 pins.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.This FIFO memory IC has a clock frequency of 40MHz .
7202LA15J8 Features
FIFOs category
Clock frequency of 40MHz
7202LA15J8 Applications
There are a lot of Integrated Device Technology (IDT) 7202LA15J8 FIFOs Memory applications.
- Computers
- General Data Collection Applications at Extreme High-Temperatures
- Code converters
- Telecommunication
- Routers
- IP Camera Buffer
- Event Recorder
- Rate buffers
- Address mapping
- IP Radio
