7202LA15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7202LA15JI Overview
You can find FIFO memory chip in the PLCC package.Data and applications can be stored in the FIFO chip's 1.1kB memory.Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .A voltage of 5V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.It has a total of 32 pins on it.During regular operation, the FIFO memory's maximum value is 40MHz .It is normal for the component to own 5V power supplies.This gadget can also generate RETRANSMIT .The 1 circuit is used in order to enhance its flexibility.
7202LA15JI Features
1.1kB memory size
FIFOs category
Frequency at most
7202LA15JI Applications
There are a lot of Integrated Device Technology (IDT) 7202LA15JI FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- One assembly
- IP Radio
- Queues for communication systems
- Laser Receiver System
- General Data Collection Applications at Low-Temperatures
- Computers
- Multimedia
- High-speed graphics pixel buffer
- Alarm System
