7202LA15JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA15JI8 Overview
You will find FIFO memory chip in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 5V .FIFO means contains a total of 32 terminations.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, a maximum current of 80mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 32 pins on this board.Normaly, the component is powered by 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.A clock on the FIFO memory IC runs at a frequency of 40MHz .
7202LA15JI8 Features
FIFOs category
Clock frequency of 40MHz
7202LA15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7202LA15JI8 FIFOs Memory applications.
- Digital buffering
- Test Equipment
- Optical memories
- Application that requires re-writable nonvolatile parameter memory
- PC peripheral
- Networking
- TVs
- Microprogramming
- HDD
- Signal processing
