7202LA15PI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA15PI Overview
PDIP is the package in which FIFO memory chip is contained.In the shape of a Bulk , it's packaged.Memory IC's recommended mounted way is Through Hole .With a supply voltage of 5V volts, high efficiency is possible.A total of 28 terminations can be found in FIFO means.These are the 28 pins for operation.In order to operate it, it requires 80mA volts of current.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Approximately 28 pins are attached to it.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.There is 40MHz frequency set for the clock of the FIFO memory IC.
7202LA15PI Features
FIFOs category
Clock frequency of 40MHz
7202LA15PI Applications
There are a lot of Integrated Device Technology (IDT) 7202LA15PI FIFOs Memory applications.
- Computers
- Programmable Logic Controller
- Alarm System
- Industrial Systems
- Look-up Tables
- Smart Meter
- Code converters
- Network bridges
- SPI Bus Flash Memory Devices
- Computer Systems
