7202LA15SOGI8
| Parameters | |
|---|---|
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 17.9mm |
| Width | 8.4mm |
| Thickness | 2.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
7202LA15SOGI8 Overview
FIFO memory chip is included in the SOIC package.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 28 terminations.In the case of the operation pins, they are 28 pins.In order to operate FIFO design, a maximum current of 80mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.It has a total of 28 pins on it.There are normally 5V power supplies attached to the component.This gadget can also be used to generate RETRANSMIT .In this FIFO memory IC, the clock runs at frequency 40MHz .
7202LA15SOGI8 Features
FIFOs category
Clock frequency of 40MHz
7202LA15SOGI8 Applications
There are a lot of Integrated Device Technology (IDT) 7202LA15SOGI8 FIFOs Memory applications.
- Switches
- Medical Monitoring Device
- Thermal Management for DDR3 Memory Modules
- Programmable Logic Controller
- Networking
- Wireless
- Computer networks
- Multi-stage synchronizer
- Test site
- Temporary storage elements
