7202LA20TP
| Parameters | |
|---|---|
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
7202LA20TP Overview
The PDIP package contains FIFO memory chip.There's a Bulk on the package.A Through Hole mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations are contained within FIFO means.28 pin is used for operation.In order to operate FIFO design, a maximum current of 80mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Approximately 28 pins are attached to it.Normally, 5V power supplies are owned by the component.The gadget can also generate a value of RETRANSMIT .This FIFO memory IC operates at a frequency of 33.3MHz .
7202LA20TP Features
FIFOs category
Clock frequency of 33.3MHz
7202LA20TP Applications
There are a lot of Integrated Device Technology (IDT) 7202LA20TP FIFOs Memory applications.
- Disk Controllers
- Magnetic memories
- MP3 Interface for Automobile
- Fabrication Site
- Notebook
- Data communications
- Communications Systems
- SPD for DDR3 Memory Modules
- IP Radio
- Programmable Logic Controller
