7202LA25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7202LA25J Overview
PLCC is the package in which FIFO memory chip is contained.There is a memory of 1.1kB on the FIFO chip that can be used to store applications and data.A Surface Mount mounting method is recommended.A supply voltage of 5V allows for high efficiency.I found that it has 32 terminations in FIFO means.32 pins are used for operation.In order to operate it, it requires 80mA volts of current.A 5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 32 pins are attached to it.During regular operation, 28.5MHz is the FIFO memory's maximum value.It is normal for the component to own 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.Using 1 circuits gives FIFO memory chip enhanced flexibility.
7202LA25J Features
1.1kB memory size
FIFOs category
Frequency at most
7202LA25J Applications
There are a lot of Integrated Device Technology (IDT) 7202LA25J FIFOs Memory applications.
- Tape controllers
- Wireless
- Computer Systems
- High-speed graphics pixel buffer
- SPI Bus Flash Memory Devices
- Portable Information Devices
- Battery Charger
- Down-Hole Energy Drilling
- Network bridges
- Analog-to-digital converters
