7202LA25JI8
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
7202LA25JI8 Overview
FIFO memory chip is contained in the PLCC package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.I found that it has 32 terminations in FIFO means.FIFO design has 32 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 32 pins.The component normally owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 28.5MHz .
7202LA25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
7202LA25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7202LA25JI8 FIFOs Memory applications.
- Tape controllers
- Temporary storage elements
- Network bridges
- Portable Information Devices
- Video
- SPI Bus Flash Memory Devices
- Transistors
- Thermal Management for DDR3 Memory Modules
- Emulators
- TVs
