7202LA25P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 80mA |
| Access Time | 25 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.0005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA25P Overview
FIFO memory chip is included in the DIP package.There is a case Bulk in which it is packaged.Mounting it in the Through Hole way is recommended.When the supply voltage is 5V there is the possibility of high efficiency.A total of 28 terminations are contained within FIFO means.28 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .In order to maximize efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 28 pins are attached to it.Normally, the component owns 5V power supplies.Using this gadget, RETRANSMIT can also be generated.
7202LA25P Features
FIFOs category
7202LA25P Applications
There are a lot of Integrated Device Technology (IDT) 7202LA25P FIFOs Memory applications.
- Cameras
- Multi-stage synchronizer
- IP Camera Buffer
- Data-acquisition systems
- Telecommunication
- HDD
- Smart Meter
- Network switching/routing
- Network bridges
- SPI Bus Flash Memory Device
