7202LA30DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA30DB Overview
FIFO memory chip can be found in the CDIP package.Bulk case is used for packaging.Mounting it in the Through Hole way is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.As far as the operation pins are concerned, they are 28 pins.For its operation, 100mA is the maximum current required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It operates at -55°C degrees Celsius to ensure reliability.Its maximum operating temperature of 125°C °C ensures stable operation.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 28 pins on this board.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC runs at a frequency of 25MHz .
7202LA30DB Features
FIFOs category
Clock frequency of 25MHz
7202LA30DB Applications
There are a lot of Integrated Device Technology (IDT) 7202LA30DB FIFOs Memory applications.
- IP Camera Buffer
- SPI Bus Flash Memory Device
- Cameras
- Data
- Consumer
- Programmable Logic Controller
- Wireless
- Test site
- Magnetic memories
- Data-acquisition systems
