7202LA30TDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0009A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA30TDB Overview
You can find FIFO memory chip in package CDIP .Bulk case is used for packaging.Through Hole is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 28 terminations.28 pins are used for operation.In order for FIFO design to operate, a maximum current of 100mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -55°C degrees Celsius at all times.Keeping the operating temperature at 125°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 28 pins are attached to it.A component normally has 5V power supplies attached to it.It is also possible to generate RETRANSMIT by using this FIFO memory.There is 25MHz frequency set for the clock of the FIFO memory IC.
7202LA30TDB Features
FIFOs category
Clock frequency of 25MHz
7202LA30TDB Applications
There are a lot of Integrated Device Technology (IDT) 7202LA30TDB FIFOs Memory applications.
- Communications
- Data-acquisition systems
- Battery Charger
- Consumer Systems
- Analog-to-digital converters
- Emulators
- General Data Collection Applications at Low-Temperatures
- Wireless
- Computer Systems
- Fabrication Site
